Two-part epoxy used to repair SMC, FRP
(traditional fiberglass), and other rigid plastic parts.
* Designed for use as a filler and adhesive
* Epoxy-based for easy sanding
* Formulated for excellent featheredge
* Work time = 10 minutes
* Sand time = 30 minutes
* Cure time = 4 hours

* Can be used to repair most of the plastic parts found on today&146;s vehicles.
* Very easy to sand.
* Excellent featheredging properties.
* Dispensed effortlessly from the tubes and mixes easily and completely.
* Cartridge offers automatic metering of Parts A and B and the option to use
the mixing nozzle for automatic mixing.

• Effectively removes grade 1200 and finer sand scratches while producing a very fine compound swirl mark finish.

• Effectively removes grade 1200 and finer sand scratches while producing a very fine compound swirl mark finish.

• Designed to quickly and effectively remove compound swirl marks from all types of automotive paints, and produce an outstanding high gloss finish. Great for black vehicles. Good handling with easy cleanup.

• Designed to quickly and effectively remove compound swirl marks from all types of automotive paints, and produce an outstanding high gloss finish. Great for black vehicles. Good handling with easy cleanup.

• Non-silicone wax designed to produce a durable, high gloss finish on fresh or cured automotive paint.

• Non-silicone wax designed to produce a durable, high gloss finish on fresh or cured automotive paint.

• Designed to remove grade P3000 3M Trizact Hookit II abrasive disc sand scratches, or to remove compound swirl marks, and leave an excellent high gloss finish.

• Designed to remove grade P3000 3M Trizact Hookit II abrasive disc sand scratches, or to remove compound swirl marks, and leave an excellent high gloss finish.

NIOSH certified as 95% efficient in removing solid and liquid particles (excluding those containing oil)
Recommended for grinding, sanding and buffing
NIOSH 42CFR84 approved

Respirator 3M-7192 with permanently attached organic vapor cartridges, 1 pair of filter retainers 3M-7054, and 1 pair of P95 filters 3M-7194
3M recommended for spray paint applications in the automotive aftermarket, with maintenance free design for convenience
Designed to be a truly maintenance free style respirator which is discarded when the organic vapor cartridges are spent
Includes the Maintenance Free Half Facepiece
Organic Vapr/P95, Medium

This two-part epoxy is a general-purpose adhesive for metal, glass and plastic.
* Strong, durable adhesive
* Works on a wide variety of substrates
* Bonds similar and dissimilar materials in minutes
* Clear, non-yellowing formulation
* Work time = 3 minutes
* Handling time = 25 minutes
* Cure time = 4 hours

Two-part urethane used to bond SMC and FRP (traditional fiberglass) body
panels to each other and to metal frames (metal must be primed with a
two-part primer).
* Excellent sag resistance
* Can be applied to frames or panels
* No heat required for curing
* Work time = 30 minutes
* Handling time = 2 hours
* Cure time = 24 hours

Box contains Fifty (50) Lids and Liners

Box contains Two (2) Cups and Collars

(Sata MC-B Primer Gun; MC-B-90; Jet-90; Binks 630 HVLP; 1.8 MGI-Primer, Binks BBR-HVLP)

(Sata NR-92; NR-95; Iwata W-400; WR-400; LPA-94; Iwata VXL-949 Primer Gun)

(DeVilbiss Gt; GFHV-510; Sharpe Cobalt HVLP Europe)

(DeVilbiss Finishline)
12mm Female

(Sagola 403-G; 433-G; 434-G; 444-G;450-G; 4100-G)
12mm Male

(AirGunsa AZ-3; Kremlin M21-G; Optima 500 HVLP)
1/4" Male

(Accuspray Issac)
3/8" Female

(Walcom Geo F/X)
12mm Male

(Sata NR.2000/RP)
16mm Male

1/4" Female Swivel

(Sharpe Cobalt HVLP (USA); Sharpe Platinum HVLP; Sharpe SGF-98)
3/8" Male

6 fl. oz.

Includes: * Two (2) Cups and Collars
* Fifty (50) Lids and Liners
* Twenty (20) Plugs
* Two (2) Inserts
* One (1) Dispenser
(6 fl. oz.)

Box contains 50 6 fl. oz. Lids and Liners
6 fl. oz.

Box contains 2 Cups and Collars
6 fl. oz.