TOPP Automotive, Inc.
Product Lines - Sharpe

Below is a partial list of Sharpe products that we carry every day. If you have any questions about a product below, or even one that you do not see, please contact us.

Please call us at 610-237-8677 for current prices and specials.

See Also: Sharpe's Infratech line

SHA-101012AAV; Air Adjusting Valve  Show Picture
SHA-121012C-MR;" Green Zone" Air Regulator 
SHA-140016B-2R; Fluid Pressure Regulator 
SHA-141016C-MR; Mini Air Regulator Show Picture
SHA-161018B-2R; Air Regulator 
SHA-162018B-500; Air Regulator Assembly 
SHA-163018C-3R; Air Regulator 
SHA-164018C-500; Air Regulator Assembly 
SHA-221024AAV; Air Adjusting Valve w/Gauge  Show Picture
SHA-248752FX100 Mini HVLP Spray Gun (1.0mm)(Finex) Show Picture
SHA-248753FX200 Conventional Spray Gun (1.4mm)(Finex) Show Picture
SHA-248754FX200 Conventional Spray Gun (1.8mm)(Finex) Show Picture
SHA-248755FX300 HVLP Spray Gun (1.3mm)(Finex) Show Picture
SHA-248756FX300 HVLP Spray Gun (1.4mm)(Finex) Show Picture
SHA-248757FX300 HVLP Spray Gun (1.5mm)(Finex) Show Picture
SHA-248758FX300 HVLP Spray Gun (1.8mm)(Finex) Show Picture
SHA-331036AAV-HV; High-Volume Air Adj. Valve w/Gauge  
SHA-4012T1-HVLP-4012 (1.2mm); Titanium Gravity Feed HVLP Gun 
SHA-4013T1-HVLP-4013 (1.3mm); Titanium Gravity Feed HVLP Gun 
SHA-4014T1-HVLP-4014 (1.4mm); Titanium Gravity Feed HVLP Gun 
SHA-4015T1-HVLP-4015 (1.5mm); Titanium Gravity Feed HVLP Gun 
SHA-4016T1-HVLP-4016 (1.6mm); Titanium Gravity Feed HVLP Gun 
SHA-4017T1-HVLP-4017 (1.7mm); Titanium Gravity Feed HVLP Gun 
SHA-4091Combo kit of 4013 and 4214 in plastic case 
SHA-4092Combo kit of 4013 and 5815L in plastic case 
SHA-4093Combo kit of 4214 and 5815L in plastic case 
SHA-4212T1-CG-4212 (1.2mm); Titanium Compliant Gravity Feed Gun 
SHA-4213T1-CG-4213 (1.3mm); Titanium Compliant Gravity Feed Gun 
SHA-4214T1-CG-4214 (1.4mm); Titanium Compliant Gravity Feed Gun 
SHA-4215T1-CG-4215 (1.5mm); Titanium Compliant Gravity Feed Gun 
SHA-4216T1-CG-4216 (1.6mm); Titanium Compliant Gravity Feed Gun 
SHA-4217T1-CG-4217 (1.7mm); Titanium Compliant Gravity Feed Gun 
SHA-U04410HOV; High Output Precision Air Valve 
SHA-5210Cobalt-2-70; Spray Gun 
SHA-5222Cobalt-97A-55; Spray Gun 
SHA-5224Cobalt-97C-55; Spray Gun 
SHA-5230Cobalt-9P-45; Spray Gun - Pressure 
SHA-5235Cobalt-10-70; Spray Gun 
SHA-5250Cobalt-PG-90; Spray Gun 
SHA-52755275; Cobalt Pressure System Overpack (5230, 7003, 7130) 
SHA-5430T1-9P-45; Spray Gun - Pressure 
SHA-5435T1-10-70; Spray Gun 
SHA-5460T1-HVLP-P-30 (0.8mm); HVLP Pressure Spray Gun 
SHA-5461T1-HVLP-P-39 (1.0mm); HVLP Pressure Spray Gun 
SHA-5462T1-HVLP-P-45 (1.2mm); HVLP Pressure Spray Gun 
SHA-5463T1-HVLP-P-55 (1.4mm); HVLP Pressure Spray Gun 
SHA-5464T1-HVLP-P-63 (1.6mm); HVLP Pressure Spray Gun 
SHA-5465T1-HVLP-P-67 (1.7mm); HVLP Pressure Spray Gun 
SHA-5466T1-HVLP-S-85 (2.2mm); HVLP Spray Gun 
SHA-5485T1-HVLP-2.2S (2.2mm); Titanium HVLP Siphon System 
SHA-5490T1-HVLP-0.8P (0.8mm); Titanium HVLP Pressure System 
SHA-5495T1-HVLP-1.2P (1.2mm); Titanium HVLP Pressure System 
SHA-56455645; Non-HVLP Pressure System Overpack (5430,7003,7130) 
SHA-56755675; HVLP System Overpack (5462, 7003, 7130) 
SHA-5712Cobalt CG-1.2; Compliant Spray Gun & Cup (1.2mm)  
SHA-5714Cobalt CG-1.4; Compliant Spray Gun & Cup (1.4mm)  
SHA-5716Cobalt CG-1.6; Compliant Spray Gun & Cup (1.6mm)  
SHA-5812LCobalt HVLP-1.2; HVLP Spray Gun & Cup (1.2mm)  
SHA-5814LCobalt HVLP-1.4; HVLP Spray Gun & Cup (1.4mm)  
SHA-5815LCobalt HVLPPG-1.5; HVLP Spray Gun & Cup (1.5mm) 
SHA-5816LCobalt HVLP-1.6; HVLP Spray Gun & Cup (1.6mm)  
SHA-5818LCobalt HVLPPG-1.8; HVLP Spray Gun & Cup (1.8mm) 
SHA-5823LCobalt HVLPPG-2.3; HVLP Spray Gun & Cup (2.3mm) 
SHA-5860Cobalt HVLP-14-30; HVLP Pressure Spray Gun (0.8mm) 
SHA-5862Cobalt HVLP-14-45; HVLP Pressure Spray Gun (1.2mm) 
SHA-5863Cobalt HVLP-14-63; HVLP Pressure Spray Gun (1.6mm) 
SHA-5864Cobalt HVLP-14-55; HVLP Pressure Spray Gun (1.4mm) 
SHA-5865Cobalt HVLP-14-70; HVLP Pressure Spray Gun (1.8mm) 
SHA-5866Cobalt HVLP-12SC-85; HVLP Spray Gun (2.2mm) 
SHA-6510400; Clamp Type Cup Assembly 
SHA-6520400-1; 400 Cup Assembly Less Canister 
SHA-6610450; "No-Drip" Clamp Type Cup Assembly 
SHA-6620450-1; 450 Cup Assembly Less Canister 
SHA-6630450-72; Reinforced Aluminum Canister 
SHA-6680575; Low Pressure Cup 
SHA-6685650GC; Aluminum Gravity Cup (650 cc) 
SHA-66901000GC; Aluminum Gravity Cup (1.0 liter) 
SHA-U06710606; Air Filter 
SHA-U06720606A; Air Control Unit 
SHA-6730606B; Air Control Unit 
SHA-6740606C; Air Control Unit 
SHA-67606760; Dryaire Desiccant System 
SHA-67706770; Dryaire Membrane Air Drying System 
SHA-6765-16765-1; Desiccant Replacement (One 5 lb. can) 
SHA-6765-46765-4; Desiccant Replacement (Master pack (4) 5 lb. cans) 
SHA-6835775-10-70; Spray Gun 
SHA-68806880; High Inlet Temperature Refrigerated Air Dryer (25 C.F.M) 
SHA-68856885; High Inlet Temperature Refrigerated Air Dryer (35 C.F.M) 
SHA-68906890; High Inlet Temperature Refrigerated Air Dryer (50 C.F.M) 
SHA-68956895; High Inlet Temperature Refrigerated Air Dryer (75 C.F.M) 
SHA-6910705FC; 1/2" Filter and Coalescer w/Auto Drains 
SHA-6920707F; 3/4" In-Line Filter w/Auto Drain 
SHA-6930707C; 3/4" In-Line Coalescer w/Auto Drain 
SHA-6950880A; Air Control Unit 
SHA-70037003; 2-Quart Pressure Cup 
SHA-70257025; 2.5 Gallon Pressure Tank (single regulated) 
SHA-70267026; 2.5 Gallon Pressure Tank (dual regulated) 
SHA-70277027; 5.0 Gallon Pressure Tank (single regulated) 
SHA-70287028; 5.0 Gallon Pressure Tank (dual regulated) 
SHA-7030D-5-55; Spray Gun 
SHA-7040MGFHVLP-1.4; Mini HVLP Gravity Feed System (1.4mm) 
SHA-7045MPFHVLP-1.1; Mini HVLP Pressure Feed Spray Gun (1.1mm) 
SHA-70507050; 2.5 Gal. Disposable Tank Liners (pk of 5) 
SHA-71107110; 6' Air Hose 5/16" I.D. w/connectors 
SHA-71207120; 6' Fluid Hose 1/4" I.D. w/connectors 
SHA-71307130; 6' Hose Kit (includes: 7110 & 7120) 
SHA-72107210; 25' Air Hose 3/8" I.D. w/connectors 
SHA-72207220; 25' Fluid Hose 3/8" I.D. w/connectors 
SHA-72307230; 35' Air Hose Assy w/High-VolumeQuick Couplers 
SHA-U07505MGC125; Aluminum Mini Gravity Cup (4 oz.) 
SHA-7506MGC190; Aluminum Mini Gravity Cup (6 oz.) 
SHA-U07510D-500; Screw Type Cup Assembly 
SHA-7520D-500-1; Screw Type Cup Assembly Less Cup 
SHA-7530D-500-72; Screw Type Cup Only w/Air Tight Cover 
SHA-8100F-2; Disposable In-line Filters (pk of 2)  
SHA-8125F-2; Disposable In-line Filters (jar of 25) 
SHA-8130F88; Air Filter 
SHA-8135F88M; Air Filter 
SHA-95009500; Spray Gun and Cup Combo (6835, 6510S) 
Replacement Parts
SHA-8200GA-10GZ; "Green Zone" Pressure Guage 
SHA-8205GA30; Cup Pressure Gauge 
SHA-8210GA60; Air Pressure Gauge 
SHA-8215GA60P; Fluid Pressure Gauge 
SHA-8220GA100; Air Pressure Gauge 
SHA-8230GA160; Air Pressure Gauge 
SHA-8240GA200; Air Pressure Gauge 
SHA-8250GA300; Air Pressure Gauge 
SHA-82558255; Spray Gun Lube (pk of 6) 
SHA-82608260; Spray Gun Brush Kit 
SHA-83108310; High-Volume Female 1/4" Quick Coupler 
SHA-83208320; High-Volume Male 1/4" Quick Coupler 
SHA-83308330; Quick Connect 1/4" Female Connector 
SHA-83408340; Quick Connect 1/4" Male Connector 
SHA-98939893; Gravity Feed Filling Station (3 guns) 
SHA-98949894; Gravity Feed Spray Gun Holder (4 guns) 
SHA-99751-16-02; Bonnet Assembly 
SHA-99781-16-05; Top Spring 
SHA-99801-16RK; Service Kit 
SHA-99811-16-05C; Top Spring 
SHA-99841-16CRK; Service Kit 
SHA-99851-17A-2R; Fluid Pressure Regulator 
SHA-99871-17-02; Spring Cage 
SHA-99881-17-05; Push Pull Adjusting Knob 
SHA-99901-17-20; Safety Valve Assembly 
SHA-99931-17-45; Nipple - 1/4" 
SHA-99951-17-65; Swivel Nut Assy 
SHA-99971-17-70; Pressure Tube 
SHA-100001-17RK; Service Kit 
SHA-100011-18-01B; Regulator Body 
SHA-U100021-18-01C; Regulator Body 
SHA-100031-18-02A; Regulator Bonnet 
SHA-U100041-18A-2R; Fluid Pressure Regulator 
SHA-U100051-18-04; Valve Seat 
SHA-U100061-18-05; Valve Spring 
SHA-U100081-18-07; Valve Body 
SHA-100101-18-09 Valve Stem 
SHA-100131-18-12; Wire Screen 
SHA-100151-18-10X; Diaphragm Assembly 
SHA-100161-18-15; Pressure Spring 
SHA-100181-18-17; Spring Washer 
SHA-100191-18-17A; Vibration Damper 
SHA-100221-18-20; Adjusting Screw 
SHA-100231-18-21; Screw 
SHA-100281-18-26; Plug 
SHA-101021-18-RK; Service Kit 
SHA-103261-20-28; Head Attach Gasket 
SHA-103321-20-34; Trigger Shaft 
SHA-103331-20-35; Trigger Screw 
SHA-15E392FX100 Air Cap 
SHA-15E393FX100 Fluid Tip, 1.0mm  
SHA-15E394FX100 Needle Packing Set  
SHA-15E395Needle Packing Seat 
SHA-15E396Gun Body 
SHA-15E397Fluid Inlet Fitting 
SHA-15E398Pattern Adjustment Knob 
SHA-15E399Air Valve Shaft 
SHA-15F402Finex 100 Aluminum cup lid 
SHA-15F403Finex 200/300 Aluminum cup lid 
SHA-15E403Air Valve Seat 
SHA-15E405Air Valve Piston 
SHA-15E408Air Valve 
SHA-15E409FX100 Fluid Needle, 1.0mm 
SHA-15E412Fluid Adjustment Knob 
SHA-15E413Air Inlet Fitting 
SHA-15E414Air Adjustment Valve 
SHA-15E415Trigger 
SHA-15E416Gasket 
SHA-15E417Trigger Pin 
SHA-15E419Gun Wrench 
SHA-15E420Brush 
SHA-15E421Fluid Filter 
SHA-15E422FX100 Cup (150 cc) 
SHA-15E423FX200 Air Cap 
SHA-15E424FX200/FX300 Fluid Tip, 1.4mm 
SHA-15E425FX200/FX300 Fluid Tip, 1.8mm 
SHA-15E426FX200/300 Packing Needle 
SHA-15E427Needle Packing Seat 
SHA-15E428Gun Body 
SHA-15E429Fluid Inlet Fitting 
SHA-15E430Pattern Adjustment Knob 
SHA-15E431Air Valve Shaft 
SHA-15E434FX200/300 Gasket 
SHA-15E435Bushing 
SHA-15E437Air Valve Seat 
SHA-15E440Air Valve 
SHA-15E441FX200/FX300 Fluid Needle, 1.4mm 
SHA-15E442FX200/FX300 Fluid Needle, 1.8mm 
SHA-15E444Fluid Adjustment Knob 
SHA-15E445Air Inlet Fitting 
SHA-15E446Air Adjustment Valve 
SHA-15E447Trigger 
SHA-15E448Gasket 
SHA-15E449FX200/300 Cup (600 cc) 
SHA-15E450FX300 Air Cap 
SHA-15E451FX300 Fluid Tip, 1.3mm 
SHA-15E452FX300 Fluid Tip, 1.5mm 
SHA-15E453Gun Body 
SHA-15E454FX300 Fluid Needle, 1.3mm 
SHA-15E455FX300 Fluid Needle, 1.5mm 
SHA-160001-70RK; Service Kit 
SHA-161001-71-01; Tip Gasket 
SHA-161011-71-02#2; Air Cap 
SHA-161081-71-02#8; Air Cap  
SHA-161091-71-02#9P; Air Cap 
SHA-161111-71-02#10; Air Cap  
SHA-161131-71-02#CC; Air Cap 
SHA-161141-71-02#MO; Air Cap 
SHA-161151-71-02#PG; Air Cap 
SHA-161161-71-02#97A; Air Cap 
SHA-161181-71-02#97C; Air Cap 
SHA-161191-71-03-45N; Fluid Needle Assembly 
SHA-161201-71-03-70N; Fluid Needle Assembly 
SHA-161221-71-03-90N; Fluid Needle Assembly 
SHA-161251-71-04-45; Fluid Tip 
SHA-161261-71-04-70; Fluid Tip 
SHA-161271-71-04-90; Fluid Tip 
SHA-161281-71-04-55; Fluid Tip 
SHA-161311-71-05-45LS; Needle & Tip Matched Set 
SHA-161321-71-06; Air Valve Assembly 
SHA-161341-71-08; Spray Width Adjuster Assembly 
SHA-161371-71-11A; Packing  
SHA-161391-71-13; Packing 
SHA-161471-71-21; Packing Nut 
SHA-161501-71-24; Needle Spring 
SHA-161511-71-25; Air Valve Cage 
SHA-161531-71-27; Head Attaching Screw 
SHA-161551-71-29; Gun Head 
SHA-161621-71-37; Air Valve Packing 
SHA-161631-71-38; Gasket 
SHA-161671-71-42; Air Valve Spring 
SHA-161751-71-50; "E" Clip 
SHA-161811-71-56; Spray Width Adjuster Body 
SHA-199201-303-09; Filter Washer 
SHA-199291-303-18; Shield 
SHA-199301-303-19; Filter Element 
SHA-204851-350-76; No Drip Tube w/Ferrule 
SHA-204871-350-78; No Drip Elbow w/Ferrule 
SHA-209881-400-01X; Fluid Tube Assembly 
SHA-209891-400-02; Bridge 
SHA-209901-400-03; Lever 
SHA-209911-400-04; Lid 
SHA-209941-400-07; Gasket (Pk of 5) 
SHA-209951-400-08; Lock Nut 
SHA-209961-400-09; Thrust Washer 
SHA-214971-450-04; Lid 
SHA-216591-500-06; Check Valve Assembly 
SHA-216821-500-78; "No-Drip" Elbow 
SHA-217071-555-07; Gasket 
SHA-217191-555-19; Cup Filter (pk of 5) 
SHA-217901-560-04; Lid Only 
SHA-217951-565-04; Lid Complete 
SHA-218551-575-04; Cup Lid 
SHA-218591-575-06; Check Valve Assembly 
SHA-218601-575-09; "No-Drip" Shield 
SHA-218671-575-13; Pressure Inlet Fitting 
SHA-218761-575-46; Pressure Relief Valve 
SHA-220121-606-01; Filter Bottle 
SHA-220131-606-02A; Filter Top 
SHA-220141-606-02B; Filter Top 
SHA-220191-606-08; Gasket 
SHA-220261-606-15; Cap Screw 
SHA-220321-606-21; Retainer 
SHA-220331-606-22; Assembly Rod 
SHA-220351-606-24; Nut 
SHA-220371-606-26; Plug 
SHA-221041-650-04; Lid Assembly 
SHA-221051-650-05; Lid Only 
SHA-221071-650-07; Cup Gasket 
SHA-221781-650-78;"No-Drip" Cap Assembly 
SHA-226011-6760-1; Air Filter w/Auto Drain 
SHA-226021-6760-2; Coalescer w/Auto Drain 
SHA-226031-6760-3; Desiccant Housing w/Desiccant 
SHA-226041-6760-R; Self-Relieving Air Regulator 
SHA-226051-6770-2; Coalescer w/Overnight Drain 
SHA-226251-6760-25; Sightglass Repair Kit 
SHA-226301-6760-30; Auto Drain (superceded by 22631) 
SHA-226311-6760-31; Overnight Drain 
SHA-226321-6760-32; Mounting Bracket 
SHA-226351-6760-35; Spacer 
SHA-226361-6760-40; Nipple 
SHA-226381-6760-1-08; O-Ring 
SHA-226401-6760-1-18; Baffle Kit 
SHA-226451-6760-1-19; Filter Element 
SHA-226471-6760-2-08; O-Ring 
SHA-226501-6760-2-15; Pop-up Indicator Repair Kit 
SHA-226551-6760-2-19; Coalescer Filter Element 
SHA-226611-6760-3-01; Flow Tube Assembly 
SHA-226631-6760-3-04; O-Ring 
SHA-226641-6760-3-07; Gasket 
SHA-226651-6760-3-08; O-Ring 
SHA-226671-6760-3-19; Filter Element (set of 2) 
SHA-226691-6760-3-21; Filter Retainer 
SHA-226701-6760-3-25; O-Ring 
SHA-226721-6760-3-28; Bottom Nut 
SHA-226791-6760-3-40; Sightglass 
SHA-226801-6760-R-10; Diaphragm/Valve Repair Kit 
SHA-226821-6760-R-12; T-Handle Adjusting Screw 
SHA-226851-6760-R-15; Bottom Spring 
SHA-226871-6760-R-20; Nipple 
SHA-U226901-6760HT-19; Filter (pk of 20) 
SHA-226951-6760-X-10; 1/2"x1/2" Ball Valve 
SHA-228011-7003-01; Fluid Tube 
SHA-228021-7003-02; Cup Lid Base Only 
SHA-228031-7003-03; Cup Ring 
SHA-228071-7003-07; Lid Gasket  
SHA-228351-7003-35; Check Valve Assembly 
SHA-228501-7003-50; Cup Handle w/Hex Nut 
SHA-228601-7003-60; Fluid Inlet 
SHA-228701-7003-70; Pressure Relief Valve 
SHA-U228721-7003-72; 2-Liter Cannister 
SHA-230011-7025-01X; Fluid Tube 
SHA-U230021-7025-02; Lid Assembly 
SHA-230071-7025-07; Lid Gasket 
SHA-230201-7025-20; Safety Valve 
SHA-230401-7025-40; Swivel Adaptor 
SHA-U230421-7025-42; Branch Tee 
SHA-230501-7025-50; Tank Handle 
SHA-230511-7025-51; Handle Hex Nut 
SHA-U230601-7025-60; Fluid Nipple 3/8" 
SHA-U230621-7025-62; Street Elbow 
SHA-230651-7025-65; Yoke Assembly w/Thumb Screw 
SHA-230701-7025-70; Hinge Pin w/"E" Clip 
SHA-230721-7027-01X; Fluid Tube 
SHA-U230751-705FC-19; Filter Element 
SHA-230801-707F-19; Filter Element 
SHA-U230851-707C-19; Coalescer Element  
SHA-248761FX100 Repair Kit 
SHA-248762FX200 Repair Kit 
SHA-249033FX100 CV-75 O-Ring Replacement Kit (CV-75) 
SHA-249034FX200/300 CV-75 O-Ring Replacement Kit (CV-75) 
SHA-249711-775-03-45N; Fluid Needle Assebly 
SHA-249761-775-03-70N; Fluid Needle Assembly 
SHA-249901-775-05-45LS; Needle & Tip, Lapped Set 
SHA-249951-775-06; Air Valve Assembly 
SHA-249971-775-08; Spray Width Adjuster Assembly 
SHA-250321-775-24; Needle Spring 
SHA-250361-775-26; Gun Handle 
SHA-250421-775-29; Gun Head 
SHA-250481-775-32; Trigger 
SHA-250661-775-41X; Air Valve 
SHA-250741-775-45; Air Inlet Nipple 
SHA-250761-775-46; Material Control Bushing 
SHA-250921-775-54; Material Control Knob 
SHA-250941-775-55X; Spray Width Adjuster Knob & Valve 
SHA-250961-775-56; Spray Width Adjuster Body 
SHA-251961-775RK; Service Kit 
SHA-260041-971-03-45N; Fluid Needle Assembly 
SHA-U260071-971-03-70N; Fluid Needle Assembly 
SHA-260091-971-03-90N; Fluid Needle Assembly 
SHA-260131-971-05-70LS; Needle & Tip, Matched Set 
SHA-260141-971-05-45LS; Needle & Tip, Matched Set 
SHA-260151-971-05-55LS; Needle & Tip, Matched Set 
SHA-U260161-971-06; Air Valve Assembly 
SHA-260181-971-08; Spray Width Adjuster Assembly 
SHA-260221-971-11A; Packing (Set of 1) 
SHA-260321-971-21; Packing Nut 
SHA-260391-971-29; Gun Head 
SHA-260421-971-32; Trigger 
SHA-U260441-971-34; Trigger Shaft 
SHA-260541-971-44; Plug 
SHA-260551-971-45; Air Inlet Nipple 
SHA-U260561-971-46; Material Control Bushing 
SHA-260651-971-55X; Spray Width Adjuster Knob & Valve 
SHA-U260661-971-56; Spray Width Adjuster Body 
SHA-U260701-971-65; Fluid Inlet Nipple 
SHA-U261111-971RK; Service Kit 
SHA-270011-975-02#14; HVLP Air Cap 
SHA-270031-975-02#12SC; HVLP Air Cap 
SHA-270041-975-03-45N; Fluid Needle Assembly 
SHA-270051-975-05-45LS; Needle & Tip, Matched Set 
SHA-270061-975-03-30N; Fluid Needle Assembly 
SHA-270071-975-03-70N; Fluid Needle Assembly 
SHA-270081-975-03-90N; Fluid Needle Assembly 
SHA-270091-975-04-45NI; Fluid Tip 
SHA-270101-975-04-55NI; Fluid Tip 
SHA-270141-975-04-70NI; Fluid Tip 
SHA-270151-975-04-90NI; Fluid Tip 
SHA-270161-975-06; Air Valve Assembly 
SHA-270181-975-08; Spray Width Adjuster Assembly 
SHA-270231-975-13; Spray Width Adjuster O-Ring 
SHA-270351-975-25; Air Valve Cage 
SHA-270561-975-46; Material Control Bushing 
SHA-270581-975-48; Fluid Inlet Gasket 
SHA-270601-975-54; Material Control Knob 
SHA-270651-975-55X; Spray Width Adjuster Knob & Valve 
SHA-270661-975-56; Spray Width Adjuster Body 
SHA-270751-975-65; Fluid Inlet Nipple 
SHA-270761-975-66; Fluid Inlet Lock Nut 
SHA-272221-975RK; Service Kit 
SHA-272401-SGF98-03-45N; Fluid Needle Assembly 
SHA-272421-SGF98-03-70N; Fluid Needle Assembly 
SHA-272451-998-04-45NI; Fluid Tip 
SHA-272551-998-04-55NI; Fluid Tip 
SHA-272601-998-04-70NI; Fluid Tip 
SHA-272651-998-05-45LS; Needle & Tip, Matched Set 
SHA-272701-998-02#10; Air Cap 
SHA-272751-998-02#A; Air Cap 
SHA-272801-998-02#C; Air Cap 
SHA-272851-998-02#9P; Air Cap 
SHA-272901-998HVLP-02#S; HVLP Air Cap 
SHA-272951-998HVLP-02#P; HVLP Air Cap 
SHA-273101-998-29; Gun Head 
SHA-273901-998RK; Service Kit 
SHA-273951-998HVLP-TC; Compliance Test Cap 
SHA-274041-1000-04; Lid Assembly 
SHA-274051-1000-05; Lid Only 
SHA-280121-CGF-02#C12; Air Cap 
SHA-280151-CGF-02#CPG; Air Cap 
SHA-280181-CGF-02#CG; Compliant Air Cap 
SHA-281081-CGF-04-0.8; Fluid Tip 
SHA-281121-CGF-04-1.2; Fluid Tip 
SHA-281141-CGF-04-1.4; Fluid Tip 
SHA-U281151-CGF-04-1.5; Fluid Tip 
SHA-281161-CGF-04-1.6; Fluid Tip 
SHA-281181-CGF-04-1.8; Fluid Tip 
SHA-281221-CGF-04-2.2; Fluid Tip 
SHA-281231-CGF-04-2.3; Fluid Tip 
SHA-281261-CGF-26; HVLP Gun Handle 
SHA-281271-CGF-26L; HVLP Gun Handle 
SHA-281281-CGF-26LCG; Compliant Gun Handle 
SHA-281291-CGF-29; HVLP Gun Head 
SHA-281301-CGF-29L; Gun Head 
SHA-281401-CGFRK; Service Kit 
SHA-281551-CSF-26; Gun Handle 
SHA-281601-CSF-29; Gun Head 
SHA-290011-D-01; Gun Body 
SHA-290061-D-02#5; Air Cap 
SHA-290211-D-04#55; Fluid Tip 
SHA-290281-D-07; Spray Width Packing 
SHA-290291-D-08; Spray Width Lock Ring 
SHA-290301-D-09; Spray Width Assembly 
SHA-290321-D-11; Needle Packing 
SHA-290331-D-12; Needle Packing Nut 
SHA-290361-D-15; Fluid Needle Spring 
SHA-290401-D-16-45; Fluid Needle 
SHA-290411-D-16-55: Fluid Needle 
SHA-290461-D-17; Material Control Knob 
SHA-290471-D-18; Plunger 
SHA-290481-D-19; Air Valve Cage 
SHA-290491-D-20; Air Valve Stem 
SHA-290501-D-21; Air Valve 
SHA-290511-D-22; Air Valve Spring 
SHA-290521-D-23; Air Valve Retainer 
SHA-290531-D-24; Air Valve Lock Nut 
SHA-290541-D-25; Air Valve Assembly 
SHA-290551-D-26; Trigger 
SHA-290561-D-27; Trigger Screw 
SHA-290571-D-28; Nut Coupling 
SHA-290581-D-29; Nipple, Fluid Connector 
SHA-290621-D-33; Cup Lid w/Fluid Tube 
SHA-290631-D-34; Cup Gasket (Pk of 5) 
SHA-290861-D-RK; Service Kit 
SHA-321341-F25-12; Nipple 
SHA-321351-F25-13; Elbow 
SHA-U327011-F88-01; Filter Bottle 
SHA-U327021-F88-02; Filter Top 
SHA-U327081-F88-08; Gasket 
SHA-327091-F88-09; Filter Washer 
SHA-U327181-F88-18; Shield 
SHA-U327191-F88-19; Filter Element 
SHA-327211-F88-21; Retainer 
SHA-33142GA-100B; Gauge 
SHA-33144GA-160B; Gauge 
SHA-33145GA-160U; Gauge 
SHA-344491-HC-320; Drain Cock 
SHA-U346061-HC-606; Air Cock 
SHA-347001-HC-1885; Air Cock 
SHA-347021-HOV-02; Adjusting Knob w/screw 
SHA-347101-HOV-06; Valve Body Assembly 
SHA-348001-MGC-04; Cup Lid 
SHA-348011-MGF-01; Gun Body 
SHA-348021-MPF-01; Gun Body 
SHA-348061-MGF-02#6; Air Cap 
SHA-348081-MPF-02#6P; Air Cap - Pressure 
SHA-348111-MPF-04-1.1; Fluid Tip 
SHA-348161-MGF-11A; Fluid Needle Packing 
SHA-348191-MGF-19; Air Valve Cage 
SHA-348231-MGF-23; Air Valve Retainer 
SHA-348251-MGF-25; Air Valve Assembly 
SHA-348281-MGF-68; Lock Ring 
SHA-348301-MGF-75; Fluid Inlet Extension 
SHA-348311-MGF-77; Fluid Inlet Gasket 
SHA-348321-MGF-78; Fluid Elbow  
SHA-348351-MGFRK; Service Kit 
SHA-349011-PLT-01; Tip Gasket 
SHA-349021-PLT-02#2000; HVLP Air Cap 
SHA-349041-PLT-02#3000; HVLP Air Cap 
SHA-349051-PLT-02#H.O.; HVLP Air Cap 
SHA-349071-PLT-03-1.1mm; Fluid Needle Assy 
SHA-349091-PLT-03-1.3mm; Fluid Needle Assy 
SHA-349101-PLT-03-1.4mm; Fluid Needle Assy 
SHA-349111-PLT-03-1.5mm; Fluid Needle Assy 
SHA-349131-PLT-03-1.7mm; Fluid Needle Assy 
SHA-349161-PLT-04-1.1mm; Fluid Tip  
SHA-349181-PLT-04-1.3mm; Fluid Tip  
SHA-349191-PLT-04-1.4mm; Fluid Tip  
SHA-349201-PLT-04-1.5mm; Fluid Tip  
SHA-349221-PLT-04-1.7mm; Fluid Tip  
SHA-349261-PLT-05-1.1mm; Fluid Tip and Needle, Matched Set 
SHA-349281-PLT-05-1.3mm; Fluid Tip and Needle, Matched Set 
SHA-349291-PLT-05-1.4mm; Fluid Tip and Needle, Matched Set 
SHA-349301-PLT-05-1.5mm; Fluid Tip and Needle, Matched Set 
SHA-349321-PLT-05-1.7mm; Fluid Tip and Needle, Matched Set 
SHA-349341-PLT-06; Air Valve Assembly (supercedes 34936) 
SHA-349371-PLT-08A; Spray WIdth Adjuster Assembly 
SHA-349381-PLT-11BHO; Packing Seal 
SHA-349391-PLT-11S; Spring 
SHA-349401-PLT-11A; Fluid Needle Packing 
SHA-349411-PLT-11B; Packing Seal 
SHA-349421-PLT-13; Width Control O-Ring 
SHA-349431-PLT-15; Packing Nut (Black) 
SHA-349441-PLT-18; Fluid Needle Sleeve 
SHA-349451-PLT-21K; Packing Nut Assy 
SHA-349461-PLT-24; Fluid Needle Spring 
SHA-349481-PLT-25; Air Valve Cage 
SHA-349501-PLT-26; HVLP Gun Handle 
SHA-349511-PLTHO-26; HVLP Gun Handle 
SHA-349521-PLT-28; Head Attach Gasket 
SHA-349541-PLT-29; HVLP Gun Head 
SHA-349591-PLT-32; Trigger 
SHA-349601-PLT-33; Spring Washers (set of 2)  
SHA-349621-PLT-35; Trigger Screw 
SHA-349641-PLT-38; Gasket 
SHA-349661-PLT-41X; Air Valve 
SHA-349701-PLT-46; Fluid Control Bushing 
SHA-349721-PLT-50; Width Control E-Clip 
SHA-349741-PLT-54; Fluid Control Knob 
SHA-349771-PLT-55XA; Spray Width Adjuster Knob & Valve (supercedes 34976) 
SHA-349781-PLT-56; Width Control Body 
SHA-349951-PLT-GW; Gun Wrench 
SHA-349961-PLTHO-TC; Compliance Test Cap 
SHA-349971-PLTRK; Service Kit 
SHA-349981-PLTHORK; Service Kit 
SHA-349991-PLT-TC; Compliance Test Cap 
SHA-370021-SGF-02#12; HVLP Air Cap - Gravity Feed 
SHA-370041-SGF-02#12P; HVLP Air Cap - Gravity Feed 
SHA-370051-SGF-04-30NI; HVLP Fluid Tip 
SHA-370061-SGF-04-45NI; HVLP Fluid Tip 
SHA-370071-SGF-04-63NI; HVLP Fluid Tip 
SHA-370081-SGF-04-55NI; HVLP Fluid Tip 
SHA-370091-SGF-05-63LS; Needle & Tip, Matched Set 
SHA-370101-SGF-05-30LS; Needle & Tip, Matched Set 
SHA-370111-SGF-04-70NI; HVLP Fluid Tip 
SHA-370121-SGF-04-85NI; HVLP Fluid Tip 
SHA-370131-SGF-04-90NI; HVLP Fluid Tip 
SHA-370141-SGF-05-45LS; Needle & Tip, Matched Set 
SHA-370151-SGF-05-55LS; Needle & Tip, Matched Set 
SHA-370161-SGF-05-70LS; Needle & Tip, Matched Set 
SHA-370171-SGF-05-90LS; Needle & Tip, Matched Set 
SHA-370181-SGF-08; Width Control Assembly 
SHA-370191-SGF-05-50LS; Needle & Tip, Matched Set 
SHA-370201-SGF-05-85LS; Needle & Tip, Matched Set 
SHA-370461-SGF-46; Fluid Control Bushing 
SHA-370551-SGF-55X; Width Control Knob & Valve 
SHA-370651-SGF-65; Gun Washer Adapter 
SHA-370751-SGF-GH; Hanging Hook 
SHA-370801-SGFHVLP-TC; Compliance Test Cap 
SHA-370851-SGFRK; Service Kit 
SHA-380011-SGF98-01; Tip Gasket 
SHA-380021-SGF98-02#GP; Air Cap 
SHA-380041-SGF98-02#A; Air Cap 
SHA-380061-SGF98-02#C; Air Cap 
SHA-380101-SGF98-02#1.0; HVLP Air Cap 
SHA-380131-SGF98-02#1.3; HVLP Air Cap 
SHA-380141-SGF98-02#1.4; HVLP Air Cap 
SHA-380151-SGF98-02#1.5; HVLP Air Cap 
SHA-380171-SGF98-02#1.7; HVLP Air Cap 
SHA-380231-SGF98-03-45N; Fluid Needle Assy 
SHA-381081-SGF98-08; Width Control Assembly 
SHA-381101-SGF98-05-0.8; Needle & Tip, Matched Set 
SHA-381111-SGF98-05-1.0; Needle & Tip, Matched Set 
SHA-381121-SGF98-05.1.2; Needle & Tip, Matched Set 
SHA-381131-SGF98-05-1.3; Needle & Tip, Matched Set 
SHA-381141-SGF98-05-1.4; Needle & Tip, Matched Set 
SHA-381151-SGF98-05-1.5; Needle & Tip, Matched Set 
SHA-381171-SGF98-05-1.7; Needle & Tip, Matched Set 
SHA-381191-SGF98-05-2.2; Needle & Tip, Matched Set 
SHA-381201-SGF98-13; O-Ring  
SHA-381241-SGF98-24; Fluid Needle Spring 
SHA-381551-SGF98-55X; Width Control Knob & Valve 
SHA-381601-SGF98RK; Service Kit 
SHA-381621-SGF98HVLP-TC; Compliance Test Cap 
SHA-399901-RDMK1B; Dryer Maintenance Kit 
SHA-399921-RDMK2B; Dryer Maintenance Kit 
SHA-399941-RDM3B; Dryer Maintenance Kit 
SHA-399951-RDMK4B; Dryer Maintenance Kit 
SHA-399961-RDMK5B; Dryer Maintenance Kit 
SHA-410021-T1HVLP-Set 1.2; Matched Needle, Tip & Cap (1.2 mm) 
SHA-410031-T1HVLP-Set 1.3; Matched Needle, Tip & Cap (1.3 mm) 
SHA-410041-T1HVLP-Set 1.4; Matched Needle, Tip & Cap (1.4 mm) 
SHA-410051-T1HVLP-Set 1.5; Matched Needle, Tip & Cap (1.5 mm) 
SHA-410061-T1HVLP-Set 1.6; Matched Needle, Tip & Cap (1.6 mm) 
SHA-410071-T1HVLP-Set 1.7; Matched Needle, Tip & Cap (1.7 mm) 
SHA-410091-T1-02-#9P; Air Cap - Pressure 
SHA-410101-T1-02-#10; Air Cap 
SHA-U410121-T1-02#CG; Compliant Air Cap 
SHA-410131-T1HVLP-02#1.3; HVLP Air Cap 
SHA-U410141-T1HVLP-02#1.4; HVLP Air Cap 
SHA-410151-T1HVLP-02#1.5; HVLP Air Cap 
SHA-410201-T1HVLP-02#P; HVLP Air Cap - Pressure 
SHA-410221-T1HVLP-02#S; HVLP Air Cap 
SHA-410421-T1-03-45N; Fluid Needle Assembly 
SHA-410451-T1-03-70N; Fluid Needle Assembly 
SHA-411051-T1-05-45LS; Needle & Tip, Matched Set (1.2 mm) 
SHA-411081-T1-05-0.8; Needle & Tip, Matched Set (0.8 mm) 
SHA-411101-T1-05-1.0; Needle & Tip, Matched Set (1.0 mm) 
SHA-411121-T1-05-1.2; Needle & Tip, Matched Set (1.2 mm) 
SHA-411131-T1-05-1.3; Needle & Tip, Matched Set (1.3 mm) 
SHA-411141-T1-05-1.4; Needle & Tip, Matched Set (1.4 mm) 
SHA-411151-T1-05-1.5; Needle & Tip, Matched Set (1.5 mm) 
SHA-411161-T1-05-1.6; Needle & Tip, Matched Set (1.6 mm) 
SHA-411171-T1-05-1.7; Needle & Tip, Matched Set (1.7 mm) 
SHA-411191-T1-05-2.2; Needle & Tip, Matched Set (2.2 mm) 
SHA-411201-T1-06; Air Valve Assembly 
SHA-411221-T1-08; Spray Width Adjuster Assembly 
SHA-411291-T1-18; Fluid Needle Sleeve 
SHA-411321-T1-21K; Packing Nut & Seal Assembly 
SHA-411341-T1-24; Fluid Needle Spring 
SHA-411351-T1-26H; Gun Handle HVLP 
SHA-411361-T1-26CG; Gun Handle - COMPLIANT 
SHA-411371-T1-27; Head Attach Screw 
SHA-411381-T1-29; Gun Head 
SHA-411391-T1-46; Fluid Control Bushing 
SHA-411411-T1-26SP; Gun Handle 
SHA-411421-T1HVLP-26SP; HVLP Gun Handle 
SHA-411431-T1HVLP-29SP; Gun Head 
SHA-411461-T1-54; Fluid Control Knob 
SHA-411481-T1-55X; Spray Width Adj. Knob & Valve 
SHA-411501-T1-CB; Fluid Port Cleaning Brush 
SHA-411551-T1-PW; Packing Nut Removal Tool 
SHA-411601-T1-TW; 1/2" Tip Removal Wrench 
SHA-411651-T1RK; Service Kit